Days

$$$

Points

Lamp room attendant

Lamp room attendant issues and checks miners’ lamps and self-rescuers, charges lamp batteries and records equipment issued and returned each shift.

On this profession page, you will learn:

Who is lamp room attendant

At shift change, the lamp room attendant matches numbered cap lamps and self-rescuers to miners, keeping an issue register that links each person to their equipment. Returned units are checked against that record before being prepared for another shift.Cap-lamp batteries go onto the appropriate charging racks. The attendant checks charge indications and light output, examining cables, connections and housings for damage that could interrupt underground lighting.Defective lamps are separated from serviceable stock for permitted repair or specialist attention. Self-rescuers receive the prescribed external checks, including their seals and condition; sealed units are not opened as part of routine issue.Unreturned equipment is reported to the shift supervisor after checking the register. Cleaning lamp contacts and keeping ready equipment separate from rejected units helps prevent accidental reissue.

AI impact on lamp room attendant

Low risk

AI replacement risk

25%

Software can flag lamps with declining battery capacity and reconcile issue numbers with returns. Charging histories can help identify units needing closer examination before the next shift. A person still inspects cracked housings, damaged leads and self-rescuer seals, and prevents rejected equipment from being issued underground.

Tasks at risk of automation
  • lamp allocation records
  • routine maintenance summaries
Tasks that will remain human
  • physical lamp and battery inspection
  • authorized repairs and safe equipment release

Key skills of lamp room attendant

ability to solve problemscreativityflexibilityadaptabilitymeticulous observationcreative thinkingindependencediligenceresponsibilitypatiencevisual abilitiesflexibility and coordinationinstallationmanufacturing technologiesworking with electronic componentsknowledge of electrical schematicsuse of soldering equipment

Work schedule and conditions

Lamp-room peaks coincide with miners arriving and returning, including night shifts. Repeated lifting of battery units and sorting at the counter make shift changes physically busy. Charging racks need ventilation, and damaged cables or leaking batteries must be kept away from serviceable equipment.

What a lamp room attendant does

  • Inspect returned cap lamps
  • Clean lamp housings and contacts
  • Charge and test batteries
  • Issue lamps and self-rescuers
  • Record equipment assignments
  • Isolate defective equipment
  • Perform authorized minor repairs

Benefits of the lamp room attendant profession

Lamp fault diagnosis

You learn to distinguish battery faults from damaged lamp leads.

Reliable underground lighting

A dependable cap lamp supports a miner throughout an underground shift.

Contact with mining crews

The issue counter brings regular contact with successive mining crews.

Disadvantages of the lamp room attendant profession

Lifting returned lamps

Peak returns involve lifting and sorting many lamp units.

Repeated lamp inspections

Inspecting rows of similar lamps can strain the eyes.

Handling damaged batteries

Damaged batteries must be separated carefully from charging racks.

Personal advice

No advice found

How to become a lamp room attendant

A route into the lamp room combines basic electrical knowledge with supervised practice on the mine’s lamps and chargers. Beginners also learn how equipment numbers connect issue records, individual miners and returns at shift change.

1. Electrical and battery fundamentals

A vocational electrical-maintenance course can introduce battery testing, low-voltage connections and safe use of chargers. Apply these skills to the lamp models used at the mine.

2. Practice through a shift change

Work beside an experienced attendant through lamp returns and the next issue period. Practise matching numbers, separating rejected units and checking that charging is complete before release.

3. Self-rescuer and equipment instruction

Take instruction specific to the mine’s self-rescuers and cap lamps, covering external checks, seals and permitted maintenance. Learn which defects require withdrawal and referral instead of a local repair.

Before independent issue, demonstrate a complete return, inspection, charging and reissue cycle for a lamp. You should also recognise damaged self-rescuer seals and know whom to notify when equipment is missing.

Questions and answers

5 months ago

Anyone here done lamp-making work in both Melbourne and Brisbane? Curious whether the pay difference is worth the move, or if it's about the same under the surface.

0

author photo

Michael Moore

curious mind

Rate how useful the content on this page is for you

Similar professions

Electrical lighting technician

office environment
analytical
sedentary

Electrical Lighting Technician designs lighting setups, controls stage illumination, and captivates the audience.

Your country: Great Britain (english)

change

© All rights reserved

When using site materials, it is mandatory to include a hyperlink to the page where the material is located, indicating our platform's brand – Jobalto.

All professions